Wear protective gloves when removing the exhaust pipe.
The exhaust pipe is extremely hot immediately after the engine has stopped.
Confirm that the exhaust pipe has cooled down before removing it.
1.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
2.REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
3.REMOVE TAILPIPE ASSEMBLY
Remove the 2 bolts.
Disconnect the exhaust pipe support and remove the tailpipe.
Remove the gasket.
4.REMOVE CENTER EXHAUST PIPE ASSEMBLY
Remove the 2 bolts and 2 compression springs.
Disconnect the 3 exhaust pipe supports and remove the center exhaust pipe.
Remove the gasket.
5.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY
Remove the 2 bolts and 4 nuts.
Disconnect the exhaust pipe support and remove the front No. 2 exhaust pipe.
Remove the 2 gaskets.
6.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Remove the 2 nuts.
Disconnect the exhaust pipe support and remove the front exhaust pipe.
Remove the gasket.