Home › Engine / Hybrid System › 1KD-FTV COOLING › THERMOSTAT
RM1840EF _51 Engine / Hybrid System _009593 1KD-FTV COOLING _0052362 THERMOSTAT G

1KD-FTV COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 1.INSPECT THERMOSTAT

HINT:
G035894

The valve opening temperature is inscribed on the thermostat.


a.

Immerse the thermostat in water and then gradually heat the water.


b.

Check the valve opening temperature.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not within the specified range, replace the thermostat.



c.
A224964
2.833,1.792 2.719,1.792 2.719,1.792 2.469,1.865 false 2.865,1.708 3.052,1.865 0.188,0.156 10 false *1
*1 Valve Lift


Check the valve lift.

Standard valve lift:

10 mm (0.394 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is below 77°C (171°F).

If the valve is not fully closed, replace the thermostat.