Home › Engine / Hybrid System › 2TR-FBE COOLING › THERMOSTAT
RM1840EF _51 Engine / Hybrid System _009596 2TR-FBE COOLING _0052379 THERMOSTAT G

2TR-FBE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 1.INSPECT THERMOSTAT

P013560

HINT:

The valve opening temperature is inscribed on the thermostat.


a.

Immerse the thermostat in the water, and then gradually heat the water.


b.

Check the valve opening temperature of the thermostat.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not as specified, replace the thermostat.


c.
A085445
2.531,1.594 2.771,1.792 0.24,0.198 10 false *1
*1 Valve Lift


Check the valve lift.

Standard valve lift:

8.5 mm (0.335 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat temperature is below 77°C (171°F).

If the valve is not fully closed, replace the thermostat.