Home › Engine / Hybrid System › 1KD-FTV LUBRICATION › OIL LEVEL SENSOR(w/ DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009600 1KD-FTV LUBRICATION _0052402 OIL LEVEL SENSOR(w/ DPF) G

1KD-FTV LUBRICATION  OIL LEVEL SENSOR(w/ DPF)  INSPECTION  


PROCEDURE

Hide 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A255027
2.336,1.114 2.499,1.272 0.163,0.158 10 *b 0.147,0.112 0.310,0.270 0.163,0.158 10 *a 2.336,1.533 2.501,1.691 0.166,0.158 10 *c
*a Component without harness connected
(Engine Oil Level Sensor)
*b On
*c Off


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 On Below 0.5 Ω
Off 1 MΩ or higher


If the result is not as specified, replace the engine oil level sensor.