Home › Engine / Hybrid System › 2TR-FBE LUBRICATION › OIL PUMP
RM1840EF _51 Engine / Hybrid System _009601 2TR-FBE LUBRICATION _0052406 OIL PUMP A

2TR-FBE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP ROTOR SET

a.
A097981
0.833,0.906 0.438,0.406 0.438,0.406 0.969,0.813 true 0.25,0.271 0.427,0.438 0.177,0.167 10 true *1
*1 Mark


Coat the oil pump rotor set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.


Hide 2.INSTALL OIL PUMP COVER

a.

Install the oil pump cover with the 7 bolts.

Torque:
8.9 N*m (91 kgf*cm, 79 in.*lbf)


Hide 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the relief valve with engine oil.


b.

Insert the relief valve and spring into the pump body hole.


c.

Install a new gasket to the plug.


d.

Using a 27 mm socket wrench, install the plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)