Home › Engine / Hybrid System › 1GR-FE LUBRICATION › OIL PUMP › from 2012.04
RM1840EF _51 Engine / Hybrid System _009602 1GR-FE LUBRICATION _0052411 OIL PUMP A

1GR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil, and insert the oil pump relief valve and relief valve spring into the valve hole.


b.

Install the relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 2.INSTALL OIL PUMP COVER

a.

Apply new engine oil to the drive and driven rotors.


b.
A134834
1.625,0.698 0.948,0.698 true 1.635,0.146 1.198,0.146 1.198,0.146 1.198,0.688 true 0.76,0.615 0.958,0.792 0.198,0.177 10 true *1
*1 Alignment Mark


Place the drive and driven rotors into the timing chain cover with the marks facing the oil pump cover side.


c.

Install the oil pump cover with the 7 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


d.

Install a new O-ring to the oil pump cover.


e.

Install a new O-ring to the oil pipe.


f.

Install the oil pipe with the 3 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)