Home › Engine / Hybrid System › 1KD-FTV STARTING › GLOW PLUG(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009603 1KD-FTV STARTING _0052416 GLOW PLUG(w/o Glow Plug Controller) A

1KD-FTV STARTING  GLOW PLUG(w/o Glow Plug Controller)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL GLOW PLUG ASSEMBLY

A111830

a.

Using a 12 mm deep socket wrench, install the 4 glow plugs.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 2.INSTALL NO. 1 GLOW PLUG CONNECTOR

a.

Install the glow plug connector by uniformly tightening the 4 nuts.

Torque:
2.2 N*m (22 kgf*cm, 19 in.*lbf)


b.

Install the 4 screw grommets.


c.

Install the wire harness with the nut.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)