Home › Engine / Hybrid System › 1KD-FTV STARTING › GLOW PLUG(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009603 1KD-FTV STARTING _0052416 GLOW PLUG(w/o Glow Plug Controller) A

1KD-FTV STARTING  GLOW PLUG(w/o Glow Plug Controller)  REMOVAL  


PROCEDURE

Hide 2.REMOVE NO. 1 GLOW PLUG CONNECTOR

a.

Remove the nut and wire harness.


b.

Remove the 4 screw grommets, 4 nuts and glow plug connector.


Hide 3.REMOVE GLOW PLUG ASSEMBLY

A111830

a.

Using a 12 mm deep socket wrench, remove the 4 glow plugs.