Home › Engine / Hybrid System › 2TR-FE STARTING › IGNITION SWITCH
RM1840EF _51 Engine / Hybrid System _009605 2TR-FE STARTING _0052435 IGNITION SWITCH A

2TR-FE STARTING  IGNITION SWITCH  REMOVAL  


PROCEDURE

Hide 1.REMOVE LOWER STEERING COLUMN COVER

A251397

a.

Remove the 3 screws and lower cover.

HINT:

Turn the steering wheel to the right and left as necessary to remove the 3 screws and lower cover.



Hide 2.REMOVE UPPER STEERING COLUMN COVER

Hide 3.REMOVE IGNITION SWITCH ASSEMBLY

A251405

a.

Disconnect the connector.


b.

Detach the 2 claws and remove the ignition switch assembly.