Home › Engine / Hybrid System › 2TR-FE STARTING › RELAY
RM1840EF _51 Engine / Hybrid System _009605 2TR-FE STARTING _0052436 RELAY G

2TR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT STARTER RELAY (ST)

a.
B060778
1.75,0.698 2,0.698 false 2.656,0.719 2.896,0.719 false 2.521,1.125 2.906,1.125 false 2.531,1.625 2.917,1.625 false 0.198,0.76 0.313,0.927 0.115,0.167 10 3 2.958,1.542 3.135,1.76 0.177,0.219 10 3 0.198,1.281 0.313,1.448 0.115,0.167 10 1 1.625,0.615 1.74,0.781 0.115,0.167 10 1 1.208,0.76 1.323,0.927 0.115,0.167 10 5 2.948,1.031 3.115,1.24 0.167,0.208 10 5 1.208,1.281 1.323,1.448 0.115,0.167 10 2 2.948,0.625 3.083,0.854 0.135,0.229 10 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Terminal Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.