1.REMOVE FRONT OIL PUMP BODY O-RING
2.FIX OIL PUMP ASSEMBLY
| *1 | Torque Converter |
Place the oil pump body on the torque converter.
3.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 2 oil seal rings.
4.REMOVE STATOR SHAFT ASSEMBLY
Remove the 13 bolts, and then remove the stator shaft from the oil pump body.
Remove the oil pump body from the torque converter.
5.INSPECT FRONT OIL PUMP BODY
6.INSPECT STATOR SHAFT ASSEMBLY
7.INSPECT CLEARANCE OF FRONT OIL PUMP BODY
8.REMOVE FRONT OIL PUMP DRIVE GEAR
9.REMOVE FRONT OIL PUMP DRIVEN GEAR
10.REMOVE FRONT OIL PUMP OIL SEAL
Using a screwdriver, pry out the oil seal.
Be careful not to damage the bush and the oil pump body.