Home › Drivetrain › A340F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM1840EF _52 Drivetrain _009609 A340F AUTOMATIC TRANSMISSION / TRANSAXLE _0052455 PARK / NEUTRAL POSITION SWITCH G

A340F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT PARK/NEUTRAL POSITION SWITCH

C197712
1.281,0.948 0.917,0.469 true 1.833,0.948 2.198,0.469 true 1.406,0.948 1.26,0.469 true 1.604,0.948 1.75,0.469 true 1.333,1.75 1.479,1.281 true 1.781,1.75 1.708,1.281 true 2.156,1.75 2.083,1.281 true 0.104,0.104 0.417,0.302 0.313,0.198 10 false *a 0.792,0.292 1.021,0.49 0.229,0.198 10 false B 2.167,0.26 2.438,0.458 0.271,0.198 10 false RL 1.177,0.26 1.406,0.458 0.229,0.198 10 false 2L 1.677,0.24 1.958,0.448 0.281,0.208 10 false RB 1.208,1.76 1.5,1.979 0.292,0.219 10 false LL 1.698,1.771 2,1.99 0.302,0.219 10 false DL 2.156,1.771 2.427,1.969 0.271,0.198 10 false L
*a Component without harness connected
(Park/Neutral Position Switch)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (B) - 5 (L) Shift lever in P Below 1 Ω
2 (RB) - 1 (RL) Shift lever in R Below 1 Ω
4 (B) - 5 (L) Shift lever in N Below 1 Ω
2 (RB) - 7 (DL) Shift lever in D or 3 Below 1 Ω
2 (RB) - 3 (2L) Shift lever in 2 Below 1 Ω
2 (RB) - 8 (LL) Shift lever in L Below 1 Ω
4 (B) - 5 (L) Shift lever not in P 10 kΩ or higher
2 (RB) - 1 (RL) Shift lever not in R 10 kΩ or higher
4 (B) - 5 (L) Shift lever not in N 10 kΩ or higher
2 (RB) - 7 (DL) Shift lever not in D or 3 10 kΩ or higher
2 (RB) - 3 (2L) Shift lever not in 2 10 kΩ or higher
2 (RB) - 8 (LL) Shift lever not in L 10 kΩ or higher


If the result is not as specified, replace the park/ neutral position switch.