Home › Drivetrain › A340F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM1840EF _52 Drivetrain _009609 A340F AUTOMATIC TRANSMISSION / TRANSAXLE _0052455 PARK / NEUTRAL POSITION SWITCH A

A340F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 1.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

C283077
1,1.438 1.708,1.531 true 1.802,1.313 1.979,0.365 1.979,0.365 1.823,0.365 true 1.625,0.271 1.938,0.427 0.313,0.156 10 false *1 0.781,1.365 1.094,1.521 0.313,0.156 10 false *2
*1 Lock Washer
*2 Lock Nut


a.

Disconnect the switch connector.


b.

Using a screwdriver, pry out the lock washer.


c.

Remove the lock nut and lock washer.


d.

Remove the bolt and park/neutral position switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.