Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM(for 2TR-FBE)
RM1840EF _52 Drivetrain _009610 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0052463 AUTOMATIC TRANSMISSION SYSTEM(for 2TR-FBE) U

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM(for 2TR-FBE)  TERMINALS OF ECM  


CHECK ECM


C214980
0.674,0.212 1.103,0.469 0.428,0.257 0.712,0.27 1.092,0.466 0.38,0.196 10 G145 1.711,0.212 2.139,0.469 0.428,0.257 1.749,0.27 2.129,0.466 0.38,0.196 10 G146 3.196,0.212 3.624,0.469 0.428,0.257 3.276,0.27 3.656,0.466 0.38,0.196 10 C95 4.116,0.212 4.544,0.469 0.428,0.257 4.196,0.27 4.576,0.466 0.38,0.196 10 C96 5.054,0.212 5.482,0.469 0.428,0.257 5.134,0.27 5.514,0.466 0.38,0.196 10 C97 6.164,0.212 6.593,0.469 0.428,0.257 6.244,0.27 6.624,0.466 0.38,0.196 10 C98

HINT:

The standard voltage at each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G146-24 (NSW) - C98-5 (E1) L-Y - BR PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
C97-17 (R) - C98-5 (E1) R-Y - BR R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
G146-23 (3) - C98-5 (E1) G-O - BR 3 shift position switch signal
·

Ignition switch ON

·

Shift lever in 3


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 3


Below 1 V
C97-15 (2) - C98-5 (E1) L - BR 2 shift position switch signal
·

Ignition switch ON

·

Shift lever in 2


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 2


Below 1 V
C97-25 (L) - C98-5 (E1) G-R - BR L shift position switch signal
·

Ignition switch ON

·

Shift lever in L


11 to 14 V
·

Ignition switch ON

·

Shift lever not in L


Below 1 V
C96-21 (S1) - C98-5 (E1) B-W - BR S1 solenoid signal 1st or 2nd gear 11 to 14 V
3rd or 4th gear Below 1 V
C96-22 (S2) - C98-5 (E1) B-R - BR S2 solenoid signal 2nd or 3rd gear 11 to 14 V
1st or 4th gear Below 1 V
C96-23 (SLT+) - C96-24 (SLT-) B-L - B-Y SLT solenoid signal Engine idling Pulse generation
C96-19 (SL) - C98-5 (E1) L-Y - BR SL solenoid signal Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF) Pulse generation
(See waveform 1)
Vehicle driving under look-up condition 11 to 14 V
C95-2 (THOC) - C96-16 (E2) W-L - BR ATF temperature sensor signal ATF temperature: 115°C (239°F) or higher Below 1.5 V
C97-2 (SP2+) - C97-9 (SP2-) G - R Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 2)
C97-5 (NC0+) - C97-10 (NC0-) V - P Speed sensor NC0 signal Engine idling
(shift lever in P or N)
Pulse generation
(See waveform 3)
G146-16 (SPD) - C98-5 (E1) V-R - BR Speed signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 4)
G146-18 (STP) - C98-5 (E1) G-W - BR STP light switch signal
·

Ignition switch ON

·

Brake pedal is depressed


11 to 14 V
·

Ignition switch ON

·

Brake pedal is released


Below 1 V
G146-8 (STA) - C98-5 (E1) B-Y - BR Starter signal Cranking 6 V or more
G146-34 (CANH) - C98-5 (E1) B - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 5)
G146-33 (CANL) - C98-5 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 6)

a.
C170572
2.479,0.854 3.135,1.052 0.656,0.198 10 false 10 V/DIV. 2.625,1.625 3.042,1.823 0.417,0.198 10 false GND 1.344,2.594 2.375,2.781 1.031,0.188 10 false 100 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Terminal No. (Symbol) Tool Setting Condition
C96-19 (SL) - C98-5 (E1) 10 V/DIV., 100 msec./DIV. Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)


b.
C170571
2.482,0.857 3.138,1.058 0.656,0.201 10 2 V/DIV. 2.624,1.58 3.036,1.783 0.412,0.203 10 GND 1.342,2.599 2.392,2.787 1.05,0.188 10 20 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Terminal No. (Symbol) Tool Setting Condition
C97-2 (SP2+) - C97-9 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


c.
C170570
2.479,0.896 3.135,1.094 0.656,0.198 10 false 5 V/DIV. 2.625,1.625 3.042,1.823 0.417,0.198 10 false GND 1.344,2.594 2.302,2.781 0.958,0.188 10 false 0.5 msec./DIV.

Using an oscilloscope, check waveform 3.

Reference
Terminal No. (Symbol) Tool Setting Condition
C97-5 (NC0+) - C97-10 (NC0-) 5 V/DIV., 0.5 msec./DIV. Engine idling (shift lever in P or N)


d.
C170574
2.479,0.865 3.135,1.063 0.656,0.198 10 false 5 V/DIV. 2.625,1.833 3.042,2.031 0.417,0.198 10 false GND 1.344,2.594 2.302,2.781 0.958,0.188 10 false 20 msec./DIV.

Using an oscilloscope, check waveform 4.

Reference
Terminal No. (Symbol) Tool Setting Condition
G146-16 (SPD) - C98-5 (E1) 5 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


e.
C161206
2.707,0.095 3.293,0.297 0.586,0.201 10 1 V/DIV. 1.591,1.687 2.449,1.882 0.858,0.195 10 10 μsec./DIV. 2.993,1.361 3.345,1.564 0.352,0.203 10 GND

Using an oscilloscope, check waveform 5.

Reference
Terminal No. (Symbol) Tool Setting Condition
G146-34 (CANH) - C98-5 (E1) 1 V/DIV., 10 μsec./DIV. Ignition switch ON


f.
C161207
2.705,0.093 3.291,0.295 0.586,0.201 10 1 V/DIV. 1.589,1.685 2.447,1.88 0.858,0.195 10 10 μsec./DIV. 2.991,1.359 3.343,1.562 0.352,0.203 10 GND

Using an oscilloscope, check waveform 6.

Reference
Terminal No. (Symbol) Tool Setting Condition
G146-33 (CANL) - C98-5 (E1) 1 V/DIV., 10 μsec./DIV. Ignition switch ON