Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR
RM1840EF _52 Drivetrain _009610 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0052466 ATF TEMPERATURE SENSOR G

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  ATF TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT ATF TEMPERATURE SENSOR

C214974
2.156,1.719 1.854,1.146 true 1.281,1.719 1.583,1.146 true 0.115,0.073 0.354,0.271 0.24,0.198 10 false *a 2.167,1.75 2.615,1.948 0.448,0.198 10 false 1 1.188,1.75 1.635,1.948 0.448,0.198 10 false 2
*a Component without harness connected
(ATF Temperature Sensor)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Specified Condition
1 - 2 79 Ω to 156 kΩ
1 - Body ground 10 kΩ or higher
2 - Body ground 10 kΩ or higher


HINT:

If the resistance is out of the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.


Standard Resistance:
ATF Temperature Specified Condition
20°C (68°F) 10.3 to 13.9 kΩ
120°C (248°F) 0.58 to 0.68 kΩ


If the result is not as specified, replace the ATF temperature sensor.