Home › Drivetrain › A343F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM1840EF _52 Drivetrain _009611 A343F AUTOMATIC TRANSMISSION / TRANSAXLE _0052484 PARK / NEUTRAL POSITION SWITCH A

A343F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 1.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C240769

Remove the 2 bolts and heat insulator.


b.

Disconnect the switch connector.


c.
C240767
0.896,0.5 0.99,0.5 0.99,0.5 1.677,1.292 true 1.042,0.896 1.135,0.896 1.135,0.896 1.677,1.406 true 0.708,0.417 0.917,0.594 0.208,0.177 10 false *1 0.854,0.813 1,0.958 0.146,0.146 10 false *2
*1 Lock Washer
*2 Lock Nut


Using a screwdriver, bend the tabs of the lock washer.


d.

Remove the lock nut and lock washer.


e.

Remove the bolt and park/neutral position switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.