Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › from 2012.04
RM1840EF _52 Drivetrain _009612 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0052498 PARK / NEUTRAL POSITION SWITCH N

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 1.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Move the shift lever to N.


b.

Remove the bolt of the park/neutral position switch assembly.


c.

Clean the bolt and the bolt hole.


d.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



e.
C283078
1.958,1.573 0.667,1.26 true 1.948,0.948 1.771,0.24 1.771,0.24 1.927,0.24 true 1.99,0.135 2.302,0.292 0.313,0.156 10 false *1 0.469,1.156 0.781,1.313 0.313,0.156 10 false *2
*1 Neutral Basic Line
*2 Groove


Align the neutral basic line with the groove as shown in the illustration.


f.

Hold the switch in position and tighten the bolt.

Torque:
13 N*m (130 kgf*cm, 10 ft.*lbf)