1.REMOVE AUTOMATIC TRANSMISSION CASE O-RING
Remove the O-ring from the oil pump assembly.
2.FIX OIL PUMP ASSEMBLY
| *1 | Torque Converter Clutch |
Place the oil pump body on the torque converter clutch.
3.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 3 oil seal rings.
4.REMOVE STATOR SHAFT ASSEMBLY
Remove the 14 bolts and stator shaft from the oil pump body.
5.REMOVE FRONT OIL PUMP BODY O-RING
Remove the O-ring from the oil pump body.
Remove the oil pump body from the torque converter clutch.
6.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY
7.INSPECT STATOR SHAFT ASSEMBLY
8.INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
9.REMOVE FRONT OIL PUMP DRIVE GEAR
10.REMOVE FRONT OIL PUMP DRIVEN GEAR
11.REMOVE FRONT OIL PUMP OIL SEAL
Using a screwdriver, pry out the oil seal.
Be careful not to damage the bushing or oil pump body.