Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM(for 1KD-FTV without i-ART) › from 2012.10
RM1840EF _52 Drivetrain _009612 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0052508 AUTOMATIC TRANSMISSION SYSTEM(for 1KD-FTV without i-ART) U

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM(for 1KD-FTV without i-ART)  TERMINALS OF ECU  


HINT:

The standard voltage at each TCM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration below as a reference for the ECU terminals.


TCM


C214981
1.541,0.252 1.859,0.434 0.317,0.182 10 C24 1.481,0.211 1.86,0.433 0.379,0.223 3.541,0.252 3.859,0.434 0.317,0.182 10 G40 3.488,0.211 3.866,0.433 0.379,0.223 5.504,0.252 5.821,0.434 0.317,0.182 10 G41 5.454,0.211 5.832,0.433 0.379,0.223

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G41-5 (BATT) - C24-1 (E1) L - BR Battery (for measuring battery voltage and for TCM memory) Always 11 to 14 V
C24-12 (NSW) - C24-1 (E1) L-Y - BR PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
C24-11 (STA) - C24-1 (E1) B-Y - BR Starter signal Cranking 6 V or higher
G40-9 (R) - C24-1 (E1) R-Y - BR R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
G40-8 (D) - C24-1 (E1) G-Y - BR D shift position switch signal
·

Ignition switch ON

·

Shift lever in D or 4


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D or4


Below 1 V
G40-13 (4) - C24-1 (E1) G-O - BR 4 shift position switch signal
·

Ignition switch ON

·

Shift lever in 4


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 4


Below 1 V
G40-12 (3) - C24-1 (E1) L - BR 3 shift position switch signal
·

Ignition switch ON

·

Shift lever in 3


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 3


Below 1 V
G40-11 (2) - C24-1 (E1) G-R - BR 2 shift position switch signal
·

Ignition switch ON

·

Shift lever in 2 or L


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 2 or L


Below 1 V
G40-10 (L) - C24-1 (E1) GR-L - BR L shift position switch signal
·

Ignition switch ON

·

Shift lever in L


11 to 14 V
·

Ignition switch ON

·

Shift lever not in L


Below 1 V
C24-18 (S1) - C24-1 (E1) GR - BR S1 solenoid signal Ignition switch ON 11 to 14 V
1st or 2nd gear 11 to 14 V
3rd, 4th or 5th gear Below 1 V
C24-17 (S2) - C24-1 (E1) W-L - BR S2 solenoid signal Ignition switch ON Below 1 V
2nd or 3rd gear 11 to 14 V
1st, 4th or 5th gear Below 1 V
C24-16 (SR) - C24-1 (E1) G - BR SR solenoid signal Ignition switch ON Below 1 V
5th gear 11 to 14 V
1st gear Below 1 V
C24-9 (SL1+) - C24-8 (SL1-) GR - V SL1 solenoid signal Engine idling Pulse generation
C24-7 (SL2+) - C24-6 (SL2-) W - R-W SL2 solenoid signal Engine idling Pulse generation
C24-20 (SLT+) - C24-19 (SLT-) G-Y - L-B SLT solenoid signal Engine idling Pulse generation
C24-22 (SLU+) - C24-21 (SLU-) B - Y SLU solenoid signal 4th gear (lock-up) or 5th gear (lock-up) Pulse generation
C24-25 (THO1) - C24-23 (E2) L - G No. 1 ATF temperature sensor signal No. 1 ATF temperature: 115°C (239°F) or higher Below 1.5 V
C24-24 (THO2) - C24-23 (E2) BR - G No. 2 ATF temperature sensor signal No. 2 ATF temperature: 115°C (239°F) or higher Below 1.5 V
G41-14 (STP) - C24-1 (E1) G-W - BR Stop light switch signal Brake pedal is depressed 7.5 to 14 V
Brake pedal is released Below 1.5 V
C24-3 (NT+) - C24-2 (NT-) V - P Speed sensor NT signal Engine idling (shift lever in P or N) Pulse generation
(See waveform 1)
C24-30 (SP2+) - C24-29 (SP2-) R - G Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 2)
G40-15 (L4) - C24-1 (E1) G-W - BR L4 shift position switch signal
·

Ignition switch ON

·

Transfer not in L4


11 to 14 V
·

Ignition switch ON

·

Transfer in L4


Below 1.5 V
G40-16 (TFN) - C24-1 (E1) W-G - BR N shift position switch signal
·

Ignition switch ON

·

Transfer not in N


11 to 14 V
·

Ignition switch ON

·

Transfer in N


Below 1.5 V
G41-6 (IG2) - C24-1 (E1) B-O - BR Ignition switch Ignition switch ON 11 to 14 V
G41-25 (SPD1) - C24-1 (E1) V-R - BR Vehicle speed signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 3)
G41-21 (CAN+) - C24-1 (E1) V - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 4)
G41-20 (CAN-) - C24-1 (E1) P - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 5)

a.
C162170
2.708,0.177 3.292,0.375 0.583,0.198 10 false 1 V/DIV. 2.99,0.958 3.344,1.156 0.354,0.198 10 false GND 1.667,1.76 2.479,1.958 0.813,0.198 10 false 2 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Terminal No. (Symbol) Tool Setting Condition
C24-3 (NT+) - C24-2 (NT-) 1 V/DIV., 2 msec./DIV. Engine idling (shift lever in P or N)


b.
C161208
2.708,0.198 3.292,0.396 0.583,0.198 10 false 2 V/DIV. 3,0.969 3.354,1.167 0.354,0.198 10 false GND 1.583,1.76 2.479,1.958 0.896,0.198 10 false 20 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Terminal No. (Symbol) Tool Setting Condition
C24-30 (SP2+) - C24-29 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


c.
C216837
2.481,0.252 3.137,0.453 0.656,0.201 10 2 V/DIV. 2.623,1.176 3.035,1.378 0.412,0.203 10 GND 1.347,1.691 2.304,1.879 0.956,0.188 10 20 msec./DIV.

Using an oscilloscope, check waveform 3.

Reference
Terminal No. (Symbol) Tool Setting Condition
G41-25 (SPD1) - C24-1 (E1) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


d.
C161206
2.707,0.095 3.293,0.297 0.586,0.201 10 1 V/DIV. 1.591,1.687 2.449,1.882 0.858,0.195 10 10 μsec./DIV. 2.993,1.361 3.345,1.564 0.352,0.203 10 GND

Using an oscilloscope, check waveform 4.

Reference
Terminal No. (Symbol) Tool Setting Condition
G41-21 (CAN+) - C24-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON


e.
C161207
2.705,0.093 3.291,0.295 0.586,0.201 10 1 V/DIV. 1.589,1.685 2.447,1.88 0.858,0.195 10 10 μsec./DIV. 2.991,1.359 3.343,1.562 0.352,0.203 10 GND

Using an oscilloscope, check waveform 5.

Reference
Terminal No. (Symbol) Tool Setting Condition
G41-20 (CAN-) - C24-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON