Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM1840EF _52 Drivetrain _009613 CLUTCH _0052512 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the bleeder plug to the cylinder body.

Torque:
11 N*m (110 kgf*cm, 8 ft.*lbf)


b.

Install the bleeder plug cap to the bleeder plug.


Hide 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install 2 new cylinder cups to a new piston.


b.
CL00672
1.094,0.552 1.115,0.708 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.


c.

Install a new spring to the piston.


d.

Install the piston together with the spring to the cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



e.

Install the No. 1 clutch release cylinder push rod to the clutch cylinder boot.


f.

Install the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod to the release cylinder body.