Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH
RM1840EF _52 Drivetrain _009613 CLUTCH _0052515 CLUTCH PEDAL SWITCH A

CLUTCH  CLUTCH PEDAL SWITCH  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.

Temporarily install the clutch switch.


b.
C223751

Adjust the switch position so that the clearance shown in the illustration between the clutch switch and cushion is within the specified range.

Standard Clearance:

0.6 to 1.0 mm (0.0236 to 0.0394 in.)


NOTICE:

Before performing the clutch switch assembly adjustment, adjust the pedal free play (See page Drivetrain>CLUTCH>CLUTCH PEDAL>ADJUSTMENT).



c.

Tighten the adjusting nut to the specified torque.

Torque:
16 N*m (160 kgf*cm, 12 ft.*lbf)