1.DRAIN MANUAL TRANSMISSION OIL
Remove the filler plug and gasket.
Remove the drain plug and gasket to drain the manual transmission oil.
Install a new gasket and the drain plug.
2.ADD MANUAL TRANSMISSION OIL
| *a | 0 to 5 mm (0 to 0.196 in.) |
Add manual transmission oil until the oil level is within 5 mm (0.196 in.) from the bottom of the filler plug opening.
GL-4
SAE 75W-90, 80 or 80W-90
2.6 liters (2.7 US qts, 2.3 Imp. qts)
Install a new gasket and the filler plug.