Home › Drivetrain › R150 / R151 / R156 MANUAL TRANSMISSION / TRANSAXLE › COUNTER GEAR › from 2012.10
RM1840EF _52 Drivetrain _009614 R150 / R151 / R156 MANUAL TRANSMISSION / TRANSAXLE _0052524 COUNTER GEAR A

R150 / R151 / R156 MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL COUNTER GEAR FRONT BEARING

a.
D026124
1.854,0.448 1.646,0.656 false 1.729,0.229 2.042,0.427 0.313,0.198 10 false SST

Using SST and a press, press in a new front bearing to the counter gear.

SST
09515-10010  

NOTICE:

Install the bearing so that the snap ring groove of the bearing faces forward.



Hide 2.INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING

a.

Select a snap ring so that the clearance between the counter gear and snap ring is within the specification.

Standard clearance:

0.1 mm (0.00393 in.) or less


Snap Ring Thickness:
Thickness
2.05 to 2.10 mm (0.0807 to 0.0827 in.)
2.10 to 2.15 mm (0.0827 to 0.0846 in.)
2.15 to 2.20 mm (0.0846 to 0.0866 in.)
2.20 to 2.25 mm (0.0866 to 0.0886 in.)
2.25 to 2.30 mm (0.0886 to 0.0906 in.)
2.30 to 2.35 mm (0.0906 to 0.0925 in.)



b.
D026119

Using a snap ring expander, install the snap ring.