Home › Drivetrain › R150F /R151F / R156F MANUAL TRANSMISSION / TRANSAXLE › COUNTER GEAR
RM1840EF _52 Drivetrain _009615 R150F /R151F / R156F MANUAL TRANSMISSION / TRANSAXLE _0052534 COUNTER GEAR G

R150F /R151F / R156F MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR  INSPECTION  


PROCEDURE

Hide 1.INSPECT COUNTER GEAR

a.
C086509

Using a micrometer, measure the outside diameter of the counter gear as shown in the illustration.

Standard outside diameter:

29.984 to 30.000 mm (1.1805 to 1.1811 in.)


Minimum outside diameter:

29.984 mm (1.1805 in.)


If the outside diameter is less than the minimum, replace the counter gear with a new one.