Home › Drivetrain › VF2A TRANSFER / 4WD / AWD › TRANSFER OIL › 2011.10–2014.10
RM1840EF _52 Drivetrain _009616 VF2A TRANSFER / 4WD / AWD _0052536 TRANSFER OIL G

VF2A TRANSFER / 4WD / AWD  TRANSFER OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSFER OIL

a.
C217364

Remove the filler plug and gasket.


b.
C282090C01
2.646,0.875 2.958,1.031 0.313,0.156 10 false *a
*a 0 to 5 mm


Check that the oil level is within 5.0 mm (0.196 in.) from the bottom of the filler plug opening.

If the result is not as specified, add transfer oil.

NOTICE:

Too much or too little oil will lead to transfer problems.



c.

When the oil level is too low, check for oil leakage.


d.

Install a new gasket to the filler plug, and then install the plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)