Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made)
RM1840EF _52 Drivetrain _009617 DRIVE SHAFT / PROPELLER SHAFT _0052546 FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made) A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made)  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO.3 ENGINE UNDER COVER (for 2TR-FE)

Hide 2.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

C281343
2.177,1.823 1.719,1.823 1.719,1.823 1.719,1.323 true 1.792,1.823 1.792,1.375 true 2.229,1.729 2.542,1.885 0.313,0.156 10 false *1
*1 Matchmark


a.

Place matchmarks on the propeller shaft flange and differential flange.


b.

Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.


c.
C281344
1.052,1.479 1.771,1.479 true 1.021,1.563 1.469,1.563 1.469,1.563 1.469,1.49 true 1.823,1.385 2.135,1.542 0.313,0.156 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


d.

Remove the 4 nuts, 4 washers and front propeller shaft.