Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made)
RM1840EF _52 Drivetrain _009617 DRIVE SHAFT / PROPELLER SHAFT _0052548 FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made) A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made)  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO.3 ENGINE UNDER COVER (for 2TR-FE)

Hide 2.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

a.
C281343
2.177,1.823 1.719,1.823 1.719,1.823 1.719,1.323 false 1.792,1.823 1.792,1.375 false 2.25,1.708 2.563,1.865 0.313,0.156 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


b.

Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.


c.
C281344
1.052,1.479 1.771,1.479 true 1.021,1.563 1.469,1.563 1.469,1.563 1.469,1.49 true 1.833,1.375 2.146,1.531 0.313,0.156 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


d.

Remove the 4 nuts, 4 washers and front propeller shaft.