Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for TSAM Made) › from 2012.04
RM1840EF _52 Drivetrain _009617 DRIVE SHAFT / PROPELLER SHAFT _0052551 PROPELLER SHAFT ASSEMBLY(for TSAM Made) A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for TSAM Made)  REMOVAL  


PROCEDURE

Hide 1.REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

a.
C281381
2,1.792 1.792,1.792 1.792,1.792 1.792,1.531 true 1.896,1.781 1.896,1.427 1.896,1.427 1.844,1.427 true 2.052,1.698 2.365,1.854 0.313,0.156 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


b.

Remove the 4 nuts and 4 washers and disconnect the propeller shaft.


c.
C281380
0.594,1.479 1.448,1.479 true 0.729,1.479 0.729,1.396 0.729,1.396 1.479,1.396 true 0.406,1.385 0.719,1.542 0.313,0.156 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


d.

Remove the 4 nuts, 4 bolts and 4 washers.


e.
C118612

Remove the 2 set bolts and 2 plates of the center support bearing from the frame crossmember.


f.

Remove the propeller shaft.