1.REMOVE FRONT WHEEL
2.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
Remove the 2 nuts, 2 retainers, 2 cushions and stabilizer link.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.
3.REMOVE FRONT STABILIZER LINK ASSEMBLY RH
Use the same procedure described for the LH side.
4.REMOVE FRONT STABILIZER BRACKET
Remove the 4 bolts and 2 brackets.
5.REMOVE FRONT NO. 1 STABILIZER BAR BUSH
Remove the 2 bushes.
6.REMOVE FRONT STABILIZER BAR
Remove the front stabilizer bar from the vehicle body.