Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER(for 4WD and Pre-Runner)
RM1840EF _53 Suspension _009621 REAR SUSPENSION _0052587 REAR SHOCK ABSORBER(for 4WD and Pre-Runner) G

REAR SUSPENSION  REAR SHOCK ABSORBER(for 4WD and Pre-Runner)  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR SHOCK ABSORBER ASSEMBLY LH

a.

Compress and extend the shock absorber rod, and check that there is no abnormal resistance or unusual sound during the operation.

If there is any abnormality, replace the shock absorber with a new one.

NOTICE:

When disposing of the shock absorber, see Disposal (See page Suspension>REAR SUSPENSION>REAR SHOCK ABSORBER(for 4WD and Pre-Runner)>DISPOSAL).