1.REMOVE REAR SPRING SHACKLE LOWER BUSH
Using a screwdriver, remove the 2 bushes from the spring shackle or spring.
Tape the screwdriver tip before use.
2.REMOVE REAR SPRING SHACKLE UPPER BUSH
Using a screwdriver, remove the 2 bushes from the spring shackle or vehicle frame.
Tape the screwdriver tip before use.
3.DISASSEMBLE REAR SPRING ASSEMBLY
Secure the rear leaf spring assembly in a vise between aluminum plates.
Using a brass bar and hammer, pry open the 3 spring clips of the rear No. 3 leaf spring.
Do not damage the leaf spring.
Secure the spring with a vise as shown in the illustration.
Remove the nut and center bolt.
for TMT Made:
Remove the 2 rear No. 3 spring spacers.
Remove the rear No. 1 spring spacer.
4.REMOVE REAR SPRING SILENCER
Remove the 4 rear spring silencers from the leaf spring.
5.REMOVE REAR SPRING LEAF BUSH
Using SST and a press, remove the rear spring leaf bush from the rear No. 1 leaf spring.