Home › Suspension › REAR SUSPENSION › REAR LEAF SPRING(for 4WD and Pre-Runner)
RM1840EF _53 Suspension _009621 REAR SUSPENSION _0052588 REAR LEAF SPRING(for 4WD and Pre-Runner) A

REAR SUSPENSION  REAR LEAF SPRING(for 4WD and Pre-Runner)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL REAR SPRING LEAF BUSH

C236680
0.719,0.76 1.073,0.76 false 1.021,1.448 0.823,1.448 0.823,1.448 0.823,0.771 true 0.302,0.698 0.615,0.844 0.313,0.146 10 false SST

a.

Using SST and a press, install a new bush to the rear No. 1 leaf spring.

SST
09631-12090  
09632-36010  


Hide 2.INSTALL REAR SPRING SILENCER

a.

Install the 4 rear spring silencers to the leaf spring.


Hide 3.REASSEMBLE REAR SPRING ASSEMBLY

a.

Install the rear No. 1 spring spacer to the leaf spring.


b.

for TMT Made:

Install the 2 rear No. 3 spring spacers to the leaf spring.


c.

Secure the springs with a vise and install the center bolt and nut.

Torque:
for TASA Made : 49 N*m (500 kgf*cm, 36 ft.*lbf)
for TMT Made : 42 N*m (425 kgf*cm, 31 ft.*lbf)


d.
C236366

Using a vise, caulk the 3 clips.


e.

Check that there is no gap between the spring clip and spring.


Hide 4.INSTALL REAR SPRING SHACKLE UPPER BUSH

a.

Install the 2 bushes to the vehicle frame.


Hide 5.INSTALL REAR SPRING SHACKLE LOWER BUSH

a.

Install the 2 bushes to the spring.