Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER(for 2WD) › from 2012.10
RM1840EF _53 Suspension _009621 REAR SUSPENSION _0052589 REAR SHOCK ABSORBER(for 2WD) A

REAR SUSPENSION  REAR SHOCK ABSORBER(for 2WD)  INSTALLATION  


PROCEDURE

Hide 1.TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

F050332

a.

Install the 2 washers to the axle housing.


b.

Install 4 new bushes to the absorber.


c.

Install the absorber (with the 4 bushes) to the U bolt seat and frame.


d.

Install the 2 washers.


e.

Temporarily install the 2 bolts.


Hide 2.INSTALL REAR WHEEL

Torque:
152 N*m (1550 kgf*cm, 112 ft.*lbf)

Hide 3.STABILIZE SUSPENSION

a.

Lower the vehicle.


b.

Bounce the vehicle up and down several times to stabilize the suspension.


Hide 4.TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH

a.

Tighten the 2 bolts.

Torque:
105 N*m (1070 kgf*cm, 77 ft.*lbf)