Home › Suspension › REAR SUSPENSION › REAR LEAF SPRING(for 2WD) › from 2012.10
RM1840EF _53 Suspension _009621 REAR SUSPENSION _0052590 REAR LEAF SPRING(for 2WD) A

REAR SUSPENSION  REAR LEAF SPRING(for 2WD)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL REAR SPRING LEAF BUSH

C236365
2.49,0.823 2.917,0.823 false 2.479,1.344 2.75,1.344 2.75,1.344 2.75,0.833 true 2.969,0.729 3.292,0.896 0.323,0.167 10 false SST

a.

Using SST and a press, press in 2 new bushes.

SST
09710-28012  (09710-07062)
09710-30041  (09710-03211)


Hide 2.INSTALL REAR SPRING SILENCER

a.

Install the 4 rear spring silencers to the leaf spring.


Hide 3.REASSEMBLE REAR SPRING ASSEMBLY

a.

Install the rear No. 1 spring spacer to the leaf spring.


b.

Install the rear No. 3 spring spacer to the leaf spring.


c.

Secure the springs with a vise and install the center bolt and nut.

Torque:
42 N*m (425 kgf*cm, 31 ft.*lbf)


d.
C236366

Using a vise, caulk the 4 clips.


e.

Check that there is no gap between the spring clip and spring.


Hide 4.INSTALL REAR SPRING SHACKLE UPPER BUSH

a.

Install the 2 bushes to the vehicle frame.


Hide 5.INSTALL REAR SPRING SHACKLE LOWER BUSH

a.

Install the 2 bushes to the spring.


Hide 6.INSTALL REAR SPRING PIN BUSH

a.

Install the 2 bushes to the bracket pin or spring.