Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR(w/ VSC)
RM1840EF _54 Brake _009623 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0052592 BRAKE ACTUATOR(w/ VSC) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(w/ VSC)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL BRAKE ACTUATOR BOLT CUSHION

a.

Install the 3 brake actuator bolt cushions to the brake actuator bracket.


Hide 2.INSTALL BRAKE ACTUATOR CASE COLLAR

a.

Install the 3 brake actuator case collars to the 3 brake actuator bolt cushions.


Hide 3.INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY

a.
C280587
2.781,2.906 2.938,3.104 0.156,0.198 10 A 1.708,2.99 1.865,3.188 0.156,0.198 10 B 2.167,0.448 2.323,0.646 0.156,0.198 10 C

Install the brake actuator bracket to the brake actuator with the 3 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

Tighten the 3 bolts uniformly in alphabetical order.