1.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
Mount the brake master cylinder in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder.
Using a pin punch and hammer, remove the master cylinder pin from the brake master cylinder reservoir.
Remove the brake master cylinder reservoir from the brake master cylinder.
2.REMOVE BRAKE MASTER CYLINDER RESERVOIR GROMMET
Remove the 2 master cylinder reservoir grommets from the master cylinder reservoir assembly.
3.REMOVE BRAKE FLUID INFORMATION LABEL
4.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.
5.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.