1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.
2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.
3.INSTALL BRAKE FLUID INFORMATION LABEL
4.INSTALL BRAKE MASTER CYLINDER RESERVOIR GROMMET
| *1 | Lithium soap base glycol grease |
Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.
Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
5.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
Install the brake master cylinder reservoir assembly to the master cylinder sub-assembly.
Mount the brake master cylinder sub-assembly in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
Using a pin punch and hammer, install the master cylinder pin to the brake master cylinder reservoir.