Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER(for TMT Made)
RM1840EF _54 Brake _009624 BRAKE SYSTEM (OTHER) _0052612 BRAKE BOOSTER(for TMT Made) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for TMT Made)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 2.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 3.REMOVE BRAKE BOOSTER ASSEMBLY

a.

for 1KD-FTV and 2KD-FTV:

Disconnect the vacuum warning switch connector and remove the vacuum warning switch from the booster.


b.

Disconnect the vacuum hose.


c.

Remove the check valve and grommet from the brake booster.


d.
C226773C05
1.031,2.417 1.031,2.208 1.031,2.208 0.771,2.208 false 1.948,1.208 1.302,0.802 1.302,0.802 1.177,0.802 false 2.177,1.99 2.177,2.781 2.177,2.781 2.281,2.781 true 1,0.708 1.24,0.896 0.24,0.188 10 false *1 0.594,2.115 0.813,2.302 0.219,0.188 10 false *3 2.344,2.688 2.615,2.844 0.271,0.156 10 false *2
*1 Brake Pedal Return Spring
*2 Clevis Pin
*3 Clip


Remove the return spring, clip and clevis pin.


e.

Loosen the push rod clevis lock nut.


f.
C111300

Remove the 4 nuts and push rod clevis.


g.

Pull out the booster and gasket.