Home › Brake › BRAKE SYSTEM (OTHER) › LOAD SENSING PROPORTIONING VALVE(w/ VSC)
RM1840EF _54 Brake _009624 BRAKE SYSTEM (OTHER) _0052614 LOAD SENSING PROPORTIONING VALVE(w/ VSC) A

BRAKE SYSTEM (OTHER)  LOAD SENSING PROPORTIONING VALVE(w/ VSC)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 2.REMOVE BLEND PROPORTIONING VALVE ASSEMBLY WITH BRACKET

C190857

a.

Remove the 2 clips.


b.

Using a union nut wrench, disconnect the brake lines at the 6 points indicated by the arrows in the illustration.


c.
C190855

Remove the 3 bolts and blend proportioning valve assembly with bracket.


Hide 3.REMOVE BLEND PROPORTIONING VALVE ASSEMBLY

a.
C190856

Remove the 2 bolts, nut and 2 valves from the bracket.