Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner)
RM1840EF _54 Brake _009625 BRAKE (FRONT) _0052626 FRONT BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 3.REMOVE FRONT FLEXIBLE HOSE

C111390

a.

Disconnect the brake tube from the front flexible hose with a union nut wrench while holding the front flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




b.

Remove the 2 clips and flexible hose.


Hide 4.REMOVE FRONT NO. 1 WHEEL CYLINDER TUBE LH

C111391

a.

Using a union nut wrench, remove the wheel cylinder tube from the brake cylinder.

NOTICE:
·

Do not bend or damage the wheel cylinder tube.

·

Do not allow any foreign matter such as dirt and dust to enter the wheel cylinder tube from the connecting points.