1.INSTALL VANE PUMP ASSEMBLY
Install the vane pump with the 2 bolts.
Connect the connector to the oil pressure switch.
2.CONNECT PRESSURE FEED TUBE ASSEMBLY
Install a new gasket and the pressure feed tube to the vane pump with the union bolt.
Make sure that the stopper of the pressure feed tube touches the front housing.
3.CONNECT RETURN HOSE
Connect the hose with the clip.
4.INSTALL FAN AND GENERATOR V BELT
5.ADD POWER STEERING FLUID
6.ADJUST POWER STEERING FLUID
7.CHECK FOR FLUID LEAKS