Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1GR-FE) › from 2012.04
RM1840EF _55 Steering _009628 POWER ASSIST SYSTEMS _0052641 VANE PUMP(for 1GR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.FIX VANE PUMP ASSEMBLY

a.
F042477
2.375,1.385 1.854,1.385 false 2.438,1.302 2.802,1.5 0.365,0.198 10 false SST

Using SST, fix the vane pump in a vise.

SST
09630-00014  (09631-00132)


Hide 2.REMOVE POWER STEERING SUCTION PORT UNION

a.

Remove the bolt and suction port union.


b.

Remove the O-ring from the suction port union.


Hide 3.REMOVE FLOW CONTROL VALVE

a.

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 4.REMOVE POWER STEERING OIL PRESSURE SWITCH

NOTICE:

Be careful not to drop or badly damage the oil pressure switch. If damaged, replace it with a new one.


Hide 5.REMOVE REAR VANE PUMP HOUSING

a.

Remove the 4 bolts and rear vane pump housing from the front vane pump housing.


b.

Remove the O-ring from the front vane pump housing.


Hide 6.TEST SHAFT SUB-ASSEMBLY WITH PULLEY

NOTICE:

Be careful not to drop or badly damage the pulley shaft. If damaged, replace it with a new one.


a.

Using a screwdriver, remove the snap ring from the pulley shaft.


b.

Remove the pulley shaft.


Hide 7.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane plates.


b.

Remove the vane pump rotor.


Hide 8.REMOVE VANE PUMP CAM RING

Hide 9.REMOVE FRONT VANE PUMP SIDE PLATE

a.
C065368

Remove the side plate from the front vane pump housing.


b.

Remove the O-ring from the side plate.


c.
F051267

Remove the O-ring from the front vane pump housing.


Hide 10.REMOVE VANE PUMP HOUSING OIL SEAL

a.
F051268

Using a screwdriver, pry out the oil seal.

NOTICE:

Be careful not to damage the front vane pump housing.