Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA › 2011.10–2012.01
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052650 RADIO ANTENNA A

AUDIO / VIDEO  RADIO ANTENNA  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ANTENNA WITH HOLDER ASSEMBLY

a.
E227755

Install the antenna with holder assembly as shown in the illustration.

HINT:

Stow the antenna pole before installing the antenna with holder assembly.



b.

Attach the clamp and install the screws.


c.

Connect the connector.


Hide 2.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).