Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) › 2011.10–2013.10
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052656 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  01-E0  Registration Complete Indication Error  01-E3  Registration Demand Transmission  01-E4  Multiple Frame Incomplete  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area
01-E0 Registration Complete Indication Error "Registration complete" signal from the master device cannot be received. -
01-E3 Registration Demand Transmission The registration demand signal from the slave device is output, or the registration demand signal is output by receiving a connection confirmation signal from the sub-master device. -
01-E4 Multiple Frame Incomplete The multiple frame transmission is incomplete. -

HINT:

Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.


CAUTION / NOTICE / HINT

HINT:

After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.


PROCEDURE

1.CLEAR DTC

NEXT

END