Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM(w/ VSC)
RM1840EF _57 Power Source / Network _009639 NETWORKING _0052677 CAN COMMUNICATION SYSTEM(w/ VSC) U

NETWORKING  CAN COMMUNICATION SYSTEM(w/ VSC)  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


a.

When communication fails in any of the main wires (communication lines) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.


b.

The table below shows the effects on each system when communication is impossible. For further details, refer to each system.

Function
1.

Control Master

2.

Related System


Action when unable to communicate DTC detection (Driver detectable)
VSC Control
(Controls driving force while VSC operates, controls VSC/TRC engine output)
1.

Brake actuator assembly (skid control ECU)

2.

ECM, Spiral cable sub-assembly (steering angle sensor), Yaw rate sensor assembly


VSC function stops Detectable (Light comes on)