WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
This system locks and unlocks the vehicle's doors remotely. The wireless door lock control system has the following features:
The door control receiver performs the code identification process and the driver side junction block assembly operates the door lock control. A serial data link is provided for communication between the door control receiver and driver side junction block assembly.
A key-integrated type transmitter is used and it contains the following 2 switches: the door lock switch and door unlock switch.
An LED is built into the transmitter so that the battery status can be checked.
FUNCTION OF MAIN COMPONENTS
| Components | Functions |
|---|---|
| Door control transmitter assembly | ·
Contains lock and unlock switches. ·
Transmits faint electric waves (recognition codes and function codes) to door control receiver. ·
Illuminates indicator light (LED) during transmission. |
| Unlock warning switch assembly | Detects if key is in ignition key cylinder or not. |
| Front door courtesy light switch assembly LH/RH
Rear door courtesy light switch assembly LH/RH |
·
Located on each door. ·
Turns on when the door is open and off when the door is closed. Outputs the door status (open or closed) to the driver side junction block assembly. |
| Front door lock assembly LH | ·
Built-in motor locks and unlocks the door. ·
Built-in door lock position switch detects the door status (locked or unlocked) and outputs a signal to the driver side junction block assembly. This switch turns off when the door is locked and turns on when the door is unlocked. |
| Front door lock assembly RH
Rear door lock assembly LH/RH |
Built-in motor locks and unlocks the door. |
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from the driver side junction block assembly and changes the waves to code data. |
SYSTEM FUNCTION
The wireless door lock control system has the following functions.
| Function | Outline |
|---|---|
| All door lock function | Pressing lock switch locks all doors. |
| All door unlock function | Pressing unlock switch unlocks all doors. |
| Answer-back function | ·
When the doors are locked by a wireless operation, the hazard warning lights and side turn signal lights flash once. ·
When the doors are unlocked by a wireless operation, the hazard warning lights side turn signal lights flash twice. |
| Automatic locking function | If no doors are opened within 30 seconds after they are unlocked by the door control transmitter assembly, all the doors lock again automatically. |
| Security function | Sends signal as rolling code |
| Transmitter recognition code registration function | Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, which is built into door control receiver |