Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM1840EF _58 Vehicle Interior _009640 DOOR LOCK _0052685 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151
0.083,1.438 0.313,1.646 0.229,0.208 10 false *c 1.313,0.073 1.531,0.292 0.219,0.219 10 false *a 1.323,0.406 1.521,0.615 0.198,0.208 10 false *b
*a Not Pushed
*b Pushed
*c Component without harness connected (Unlock Warning Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.