Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM1840EF _58 Vehicle Interior _009641 THEFT DETERRENT / KEYLESS ENTRY _0052691 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

E225119
2.563,0.594 2.563,0.167 2.563,0.167 2.875,0.167 true 2.396,0.74 2.396,0.25 2.396,0.25 2.167,0.25 true 0.063,0.063 0.24,0.229 0.177,0.167 10 false *a 2.927,0.063 3.188,0.24 0.26,0.177 10 false *b 1.969,0.156 2.208,0.333 0.24,0.177 10 false *c
*a Component without harness connected (Hood Lock Assembly)
*b Unlock Position
*c Lock Position


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Unlock position 10 kΩ or higher
1 - 2 Lock position Below 1 Ω


If the result is not as specified, replace the hood lock assembly.