Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY
RM1840EF _58 Vehicle Interior _009641 THEFT DETERRENT / KEYLESS ENTRY _0052692 SECURITY INDICATOR LIGHT ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY INDICATOR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT SECURITY INDICATOR LIGHT ASSEMBLY

B119749
2.813,0.896 2.813,0.458 2.813,0.458 2.969,0.458 true 2.823,1.24 2.823,1.656 2.823,1.656 2.979,1.656 true 1.677,0.063 1.958,0.25 0.281,0.188 10 false *a 3.052,1.573 3.292,1.781 0.24,0.208 10 false E 3.031,0.375 3.292,0.615 0.26,0.24 10 false LP
*a Component without harness connected
(Security Indicator Light)


a.

Apply battery voltage between the terminals of the security indicator light assembly, and check the illumination of the security indicator light assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (LP)
Battery negative (-) → Terminal 1 (E)
Illuminates


NOTICE:
·

If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not illuminate.

·

If the voltage is too low, the security indicator light will not illuminate.



If the result is not as specified, replace the security indicator light assembly.