Refer to the intelligent tester operator's manual for further details.
CHECK FOR IMMOBILISER DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Immobiliser / DTC.
Check the DTCs.
CHECK FOR ECM DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Check the DTCs.
CHECK FOR BLOCKING DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / DCM / DTC.
Check the DTCs.
CLEAR IMMOBILISER DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Immobiliser / DTC.
Clear the DTCs.
CLEAR ECM DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Clear the DTCs.
CLEAR BLOCKING DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / DCM / DTC.
Clear the DTCs.